Fluke 5520A - External Connection Commands

15
Command Summary (cont)
External Connection Commands
CUR_POST Selects terminals for current
output.
CUR_POST? Returns terminals for current
output.
EARTH Selects earth ground is isolated
or tied.
EARTH? Returns earth ground isolated
or tied.
EXTGUARD Connects or disconnects the
internal guard shield from the
LO binding post.
EXTGUARD? Returns whether the internal
guard shields are connected
or disconnected from earth
(chasis) ground.
LOWS Selects low terminals open or
tied.
LOWS? Returns low terminals open or
tied.
RTD_TYPE Sets RTD sensor type.
RTD_TYPE? Returns RTD sensor type.
TC_REF Sets internal/external reference
value.
TC_REF? Returns TC reference value.
TC_TYPE Sets TC sensor type.
TC_TYPE? Returns TC sensor type.
TSENS_TYPE Sets temperature sensor type.
TSENS_TYPE? Returns temperature sensor
type.