Fluke 5520A - Status Commands

24
Command Summary (cont)
Setup and Utility Commands (cont)
TEMP_STD Sets temperature standard.
TEMP_STD? Returns temperature standard.
UNCERT? Retums specified uncertainties
for the present output. If there
are no specifications for an
output, returns zero.
Status Commands
ERR? Returns first error code and
explanation in queue and
removes it from the queue.
EXPLAIN? Explains an error code.
FAULT? Returns first error code in queue
and removes it from the queue.
ISCE Loads bytes into ISCE0 and
ISCE1.
ISCE? Returns ISCE0 and ISCE1
contents.
ISCE0 Loads two bytes into ISCE0.
ISCE0? Returns contents of ISCE0.
ISCE1 Loads two bytes into ISCE1.
ISCE1? Returns contents of ISCE1.
ISCR? Returns contents of
ISCR0/ISCR1.
ISCR0? Returns and clears ISCR0.
ISCR1? Returns and clears ISCR1.
ISR? Returns contents of ISR register.