Fluke 5730A Manual

Calibration baths
Compact calibration baths
Model Range Stability Depth
6332A* 50 °C to 300 °C
(122 °F to 572 °F)
± 0.01 °C 450 mm (17.7 in)
7342A* -40 °C to 150 °C
(-40 °F to 302 °F)
± 0.01 °C 450 mm (17.7 in)
6330 35 °C to 300 °C
(95 °F to 572 °F)
± 0.005 °C at 100 °C
± 0.015 °C at 300 °C
234 mm (9.25 in)
7320 –20 °C to 150 °C
(-4 °F to 302 °F)
± 0.005 °C at –20 °C
± 0.005 °C at 25 °C
234 mm (9.25 in)
7340 –40 °C to 150 °C
(-40 °F to 302 °F)
± 0.005 °C at –40 °C
± 0.005 °C at 25 °C
234 mm (9.25 in)
7380 –80 °C to 100 °C
(-112 °F to 212 °F)
± 0.006 °C at –80 °C
± 0.010 °C at 0 °C
178 mm (7 in)
6331 35 °C to 300 °C
(95 °F to 572 °F)
± 0.015 °C at 300 °C
± 0.005 °C at –20 °C
457 mm (18 in)
7321 –20 °C to 150 °C
(-4 °F to 302 °F)
± 0.005 °C at 25 °C
± 0.005 °C at –40 °C
457 mm (18 in)
7341 –45 °C to 150 °C
(-49 °F to 302 °F)
± 0.005 °C at –40 °C
± 0.005 °C at 25 °C
457 mm (18 in)
7381 –80 °C to 110 °C
(-112 °F to 230 °F)
± 0.006 °C at –80 °C
± 0.005 °C at 0 °C
457 mm (18 in)
Standard size calibration baths
7080 –80 °C to 110 °C
(-112 °F to 230 °F)
± 0.0025 °C at –80 °C
± 0.0015 °C at 25 °C
305 mm (12 in)
7008 –5 °C to 110 °C
(23 °F to 230 °F)
± 0.0007 °C at 25 °C
± 0.0008 °C at 0 °C
331 mm (13 in)
7011 –10 °C to 110 °C
(14 °F to 230 °F)
± 0.0008 °C at 25 °C
± 0.0008 °C at 0 °C
305 mm (12 in)
7040 –40 °C to 110 °C
(-40 °F to 230 °F)
± 0.0015 °C at 25 °C
± 0.001 °C at 40 °C
305 mm (12 in)
6020 40 °C to 300 °C
(104 °F to 572 °F)
± 0.005 °C at 300 °C
± 0.001 °C at 40 °C
305 mm (12 in)
6022 40 °C to 300 °C
(104 °F to 572 °F)
± 0.005 °C at 300 °C
± 0.001 °C at 40 °C
464 mm (18.25 in)
6024 40 °C to 300 °C
(104 °F to 572 °F)
± 0.005 °C at 300 °C
± 0.002 °C at 200 °C
337 mm (13.25 in)
6050H 180 °C to 550 °C
(356 °F to 1022 °F)
± 0.007 °C at 500 °C
± 0.006 °C at –80 °C
305 mm (12 in)
Other
Item Description
Bath
accessories
Stands, rods, and clamps to suspend and support your probes and thermometers.
Bath fluids Silicone oils, salt, and cold fluids in convenient, small quantities.
Rosemount
bath
controllers
Model 7900 controller designed by Hart integrates the features of Hart’s 2100 controller and can
be used in place of the Rosemount 915 controller with Rosemount-designed baths.
Fluke
Calibration
bath
controllers
Model 2100 and 2200 controllers can be integrated with homemade baths or other heat sources
to achieve performance levels approaching Fluke Calibration baths.
*Not for sale in Europe
16
www.flukecal.comTemperature calibration

Fluke 5730A Specifications

General

Type	Multifunction Calibrator
Resistance Range	0 to 1 GΩ
AC Voltage Frequency	10 Hz to 1 MHz
Display	Color LCD
Interfaces	RS-232, Ethernet
Weight	18 kg
DC Voltage Range	0 to ±1100 V
Dimensions	172 mm H x 432 mm W x 457 mm D (6.8 in H x 17 in W x 18 in D)