Fluke 5730A Manual

Selection guide
Manual
Deadweight testers
P 3 011 P3012 P3013 P3014 P3015 P3022 P3023 P3025 P3031 P3032
Workload
Gauges/sensors
Gage
Bidirectional*
Pressure range
Vacuum
90 % vacuum
Positive gage pressure
5 inHO (1.5 kPa)
12 inHO (3 kPa)
1.5 psi (10.3 kPa)
2 psi (13.8 kPa)
2.2 psi (15 kPa)
3 psi (20.7 kPa)
5 psi (34.4 kPa)
10 psi (68.9 kPa)
15 psi (103.4 kPa)
20 psi (137.9 kPa)
30 psi (200 kPa)
40 psi (275.8 kPa)
100 psi (.7 MPa)
150 psi (1 MPa)
200 psi (1.4 MPa)
300 psi (2 MPa)
500 psi (3.4 MPa)
600 psi (4 MPa)
1,000 psi (7 MPa)
2,000 psi (14 MPa)
Accessories
Hand pump
Fine Inc. Weights
Gas Pressure Calibrators
This selection guide presents only some of the Fluke Calibration gas pressure
calibration line. Other higher accuracy solutions are available for all pressure ranges.
*Requires vacuum pump
=Optional
0.0015 % FS
0.015 % reading uncertainty
30
www.flukecal.comPressure calibration

Fluke 5730A Specifications

General

Type	Multifunction Calibrator
Resistance Range	0 to 1 GΩ
AC Voltage Frequency	10 Hz to 1 MHz
Display	Color LCD
Interfaces	RS-232, Ethernet
Weight	18 kg
DC Voltage Range	0 to ±1100 V
Dimensions	172 mm H x 432 mm W x 457 mm D (6.8 in H x 17 in W x 18 in D)