Fluke 6070A - Page 23

Section 2
Shipping and Service Information
2-1. SHIPPING INFORMATION
2-2. The instrument is packaged and shipped in a foam-packed container. When you
receive the instrument, inspect it thoroughly for possible shipping damage. Special
instructions for inspection and claims are included in the shipping container.
2-3. If reshipment is necessary, use the original container. If the original container is not
available, order a new container from the John Fluke Mfg. Co., Inc.; P.O. Box 43210;
Mountlake Terrace; Wa 98043; telephone (206) 774-2211. When ordering a new shipping
container, state the instrument model number.
2-4. SERVICE INFORMATION
2-5. Warranty
2-6. Each John Fluke Model 6070A or 6071A Synthesized RF Signal Generator is
warranted for a period of 1 year upon delivery to the original purchaser. The
WARRANTY is located at the front of this manual.
2-7. Service
2-8. Factory authorized service (including calibration) for either the 6070A or the
6071A is available at selected John Fluke Technical Service Centers. For service and/or
calibration, return your instrument to the nearest John Fluke Technical Service Center.
The local technical service center will handle transportation to and from the selected
technical service centers as required. Tables A-l and A-2 in Appendix A provide a
complete list of John Fluke Technical Service Centers. Appendix A is located at the rear
of this manaul. If requested, you will be provided with an estimate before work is begun
on instruments that are beyond the warranty period.
2-9. ADDITIONAL INFORMATION
2-10. For any additional information, contact your nearest John Fluke Sales
Representative or the John Fluke Mfg. Co., Inc.; P.O. Box 43210; Mountlake Terrace;
WA 98043; telephone (206) 774-2211. Tables A-3 and A-4 in Appendix A provide a
complete list of John Fluke Sales Representatives. Appendix A is located at the end of
this manual.