Fluke 6070A - Page 9

Table 1-2. 6070A/6071A Accessories and Options
MODEL/
OPTION NO.
NAME COMMENTS
ACCESSORIES
Y6001
Rack Mount Kit
Includes: M05-205-600 (5Vi inch Rack
Mount Ears) and MOO-280-610 (24-
inch Rack Slides).
Y8001
IEEE Standard Cable. 1 meter
Y8002
IEEE Standard Cable. 2 meters
Y8003
IEEE Standard Cable. 4 meters
Y9100
Attenuator. 6 dB
50 Ohm, 2W, BNC
Y9101
Attenuator, 15 dB 50 Ohm, 2W, BNC
Y9102
Attenuator, 20 dB 50 Ohm, 2W, BNC
Y9103
50 Ohm Feedthru Termination. BNC
Y9111
Coaxial Cable. 50 Ohm. 3 feet
{0.91m), BNC
Y9112 Coaxial Cable, 50 Ohm, 6 feet
(1.83m), BNC
Y9300 Directional Coupler, 100 kHz to 2
1.95 dB Coupling. 0.5 dB Insertion
GHz, 50 Ohm Impedance, BNC
Loss, typically 30 dB directivity to 1
GHz.
Y9301
Min-loss Pad. DC to 1 GHz. 50 Ohm In Better than 1.2 to 1 VSWR, not more
- 75 Ohm Out, 1 W. BNC
than 6 dB Insertion loss.
Y9302
Attenuator. 3 dB
DC to 1 GHz, 2W average, 50 Ohm.
Y9303
Attenuator, 6 dB
1.25 VSWR max.. Type N
Y9304 Attenuator, 10 dB
Y9305 Attenuator. 20 dB
Y9306 Attenuator, 30 dB
Y9307
Adapter, Type N Male to BNC Female,
75 Ohm impedance
Y9308 Adapter, Type N Male to BNC Female,
50 Ohm Impedance
Y9309 Adapter, Type N Male to Type N Male
Y9310
Adapter. Type N Male to SMA Female
Y9311
RF Detector, Broad Crystal Detector, Total Output Flatness: ±0.6 dB 100
50 Ohm, BNC
kHz to 1.2 GHz, positive output.
Y9312 Double Balanced Mixer, 500 Hz to 10 +7 dBm LO. conversion loss 10 dB
MHz, BNC
max., isolation 20 dB min.
Y9313
Double Balanced Mixer, 2 MHz to 1
17 dBm LO, conversion loss 10 dB
GHz, BNC
max., isolation 20 dB min.
Y9314 Power Splitter, 2 MHz to 1 GHz, BNC
Y9315
Coaxial Cable, 50 Ohm. Type N Male
Y9316 Cap, Non-shorting, BNC
Y9317 50 Ohm Termination, Shielded,
Type N