Fluke 62 MAX Calibration Information

62 Max/62 Max +
Calibration Information
4
Change the Battery
To install or change the AA IEC LR06 battery, use a flat-head screwdriver to remove the battery compartment door.
Replace the battery as shown in Figure 2. Be sure to observe the correct polarity.
hiy001.eps
Figure 2. Change the Battery

Fluke 62 MAX Specifications

General

Type	Infrared environment thermometer
Purpose	Outdoor
Placement	Hand
Display type	Digital
Product color	Yellow
Display form factor	Rectangular
International Protection (IP) code	IP54
Accuracy	1 °C
Response time	500 ms
Spectral response	8 - 14 µm
Min/Max temperature memory	Yes
Temperature measurement range	-30 - 500 °C
Temperature measurement units	F, °C
Certification	EN 61326-1:2006 EN 61326-2:2006 EN/IEC 61010-1: 2001 EN 60825-1 Class II
Battery type	AA
Power source	Battery
Number of batteries supported	1
Operating altitude	0 - 2000 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Battery life	10 h

Weight and Dimensions

Depth	75 mm
Width	85 mm
Height	175 mm
Weight	255 g