Fluke 62 MAX Calibration Information

Infrared Thermometer
Specifications
5
Specifications
62 MAX 62 MAX +
Temperature Range
-30 °C to 500 °C
(-22 °F to 932 °F)
-30 °C to 650 °C
(-22 °F to 1202 °F)
Accuracy
(Calibration geometry with ambient
temperature 23 °C ±2 °C)
≥0 °C: ±1.5 °C or ±1.5 % of reading,
whichever is greater
(≥32 °F: ±3 °F or ±1.5 % of reading,
whichever is greater)
≥ -10 °C to <0 °C: ±2 °C
(≥14 °F to <32 °F: ±4 °F)
< -10 °C: ±3 °C
(<14 °F: ±6 °F)
≥0 °C: ±1 °C or ±1 % of reading,
whichever is greater (≥32 °F: ±2 °F or
±1 % of reading, whichever is greater)
≥ -10 °C to <0 °C: ±2 °C
(≥14
°F to <32 °F: ±4 °F)
< -10 °C: ±3 °C
(<14 °F: ±6 °F)
Response Time (95 %) <500 ms (95 % of reading) <300 ms (95 % of reading)
Spectral Response 8 to 14 microns
Emissivity 0.10 to 1.00
Temperature Coefficient ±0.1 °C/°C or ±0.1 %/°C of reading (whichever is greater)
Optical Resolution
10:1
(calculated at 90 % energy)
12:1
(calculated at 90 % energy)
Display Resolution 0.1 °C (0.2 °F)
Repeatability (% of reading)
±0.8 % of reading or ±1.0 °C (2 °F),
whichever is greater
±0.5 % of reading or ±0.5 °C (1 °F),
whichever is greater
Power 1 AA IEC LR06 Battery
Battery Life 10 hours with laser and backlight on 8 hours with laser and backlight on
Weight 255 g (8.99 oz)
Size (175 x 85 x 75) mm (6.88 x 3.34 x 2.95) inches
Operating Temperature 0 °C to 50 °C (32 °F to 122 °F)
Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F), (without battery)
Operating Humidity 10 % to 90 % RH non-condensing @ 30 °C (86 °F)
Operating Altitude 2000 meters above mean sea level
Storage Altitude 12,000 meters above mean sea level
Drop Test 3 meters
IP Rating IEC 60529: IP 54
Implement Standard Q/SXAV37
Laser Safety IEC 60825-1, Class 2
Electromagnetic Environment
IEC 61326-1: Portable
Electromagnetic Compatibility
Applies to use in Korea only:
Class A Equipment (Industrial Broadcasting & Communication Equipment)
[1]
[1] This product meets requirements for industrial (Class A) electromagnetic wave
equipment and the seller or user should take notice of it. This equipment is
intended for use in business environments and is not to be used in homes.

Fluke 62 MAX Specifications

General

Type	Infrared environment thermometer
Purpose	Outdoor
Placement	Hand
Display type	Digital
Product color	Yellow
Display form factor	Rectangular
International Protection (IP) code	IP54
Accuracy	1 °C
Response time	500 ms
Spectral response	8 - 14 µm
Min/Max temperature memory	Yes
Temperature measurement range	-30 - 500 °C
Temperature measurement units	F, °C
Certification	EN 61326-1:2006 EN 61326-2:2006 EN/IEC 61010-1: 2001 EN 60825-1 Class II
Battery type	AA
Power source	Battery
Number of batteries supported	1
Operating altitude	0 - 2000 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Battery life	10 h

Weight and Dimensions

Depth	75 mm
Width	85 mm
Height	175 mm
Weight	255 g