Fluke 682 - Changing the Network Interface; User Interface

68x Series
Getting Started
6
Changing the Network Interface
For the Fluke 686 and 685, use the following procedure to change the interface
between Ethernet and Token Ring:
1. Press
B
from the top-level softkeys.
2. Press
I
to confirm the change of interface or press
G
to cancel.
3. Wait about 20 seconds for the change of interface to be completed.
User Interface
The instrument’s user interface provides easy access to all functions and
consists of the following parts:
r LCD Display
r Keyboard
r Individual and Bargraph LEDs
The user interface is the same for all of the Fluke 68x Series Enterprise
LANMeter instruments. They differ only in the way the individual (status)
LEDs are labeled and in the name on the instrument. The Fluke 686 and 685
are labeled for both Ethernet and Token Ring functions, the Fluke 683 and 682
have an Ethernet label, and the Fluke 680 has a Token Ring label. Examples
of LANMeter instrument labeling are shown in Figures 2 and 4.