Fluke 682 - LCD Display

68x Series
Getting Started
8
LCD Display
The instrument’s display consists of a LCD graphic screen for output as shown
in Figure 3. The display has the following specific areas for displaying
different types of information:
r Work Area
r Softkey Labels
r Status Line
Work
Area
Status
Line
Softkey Labels
Figure 3. LCD Display Areas
Use the
Display Config
softkey to control the screen backlight operation.
The
Display Config
softkey is accessed by pressing the
Setup/Utils
softkey
and then the
E
key. At any time, you can press and release
H
, then
press
T
to turn the LCD backlight on and off. Refer to the “Display
Configuration” section in this manual for more information on controlling the
screen backlight.
You can control the display contrast from the top-level (power-on) menu by
using
K
and
J
. Press
K
to make the display lighter and press
J
to make
the display darker.