EasyManuals Logo

Fluke 71 Series Product Overview

Fluke 71 Series
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
Pressure Calibrator
Specifications
11
Specifications
Specifications are based on a one year calibration cycle
and apply for ambient temperature from +18 °C to +28 °C
unless stated otherwise. “Counts” are the number of
increments or decrements of the least significant digit.
Pressure Sensor Input
Model Range Accuracy
Max Non-
destructive
Pressure
1G
-1 to 1 PSI
(-7 to 8 kPa)
5 PSI
(34.5 kPa)
30G
-12 to 30 PSI (-
83 to 207 kPa)
60 PSI
(413 kPa)
100G
-12 to 100 PSI
(-83 to 690
kPa)
200 PSI
(1.4 mPa)
300G
-12 to 300 PSI
(-83 to 2068
kPa)
± 0.05 % of
Range
375 PSI
(2.6 mPa)
Temperature coefficient: 0.01 % of range per
°
C for
temperature ranges -10
°
C to 18
°
C and 28
°
C to 55
°
C
Pressure Module Input
Range Resolution Accuracy
(determined by Pressure Module)
DC mA Input
Range Resolution Accuracy, ±(% of
Reading + Counts)
24 mA 0.001 mA 0.015 + 2
Fusless overvoltage protection
Temperature coefficient: 0.005 % of range per
°
C for
temperature ranges -10
°
C to 18
°
C and 28
°
C to 55
°
C
Loop Supply
24 V dc nominal
General Specifications
Maximum voltage applied between either mA terminal
and earth ground or between the mA terminals: 30 V
Maximum transient overvoltage: 240 V ac for
10 seconds
Storage temperature: -40 °C to 60 °C

Other manuals for Fluke 71 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fluke 71 Series and is the answer not in the manual?

Fluke 71 Series Specifications

General IconGeneral
BrandFluke
Model71 Series
CategoryTest Equipment
LanguageEnglish

Related product manuals