19
Parts and Controls
Accessories
Accessories 7.3
Transport/Pour Access Lid 7.3.1
A transport/pour access lid (Figure 3) is provided so the fluid being used does not have
to be removed when transporting. The lid doubles as a pour spout.
Figure 3
Pour Spout
Pour Spout
Cover
Transport
Plug
Transport/Pour Access Lid
Access Cover
Guide Ring
Bath Lids and Lid Parts
Access Cover 7.3.2
An access cover is available for optimum stability. Holes should be drilled in the
access cover to allow insertion of the probes into the well. The holes must be within
the guide ring for the probes to fit into the probe basket (Figure 3).
Warning: DO NOT use the instrument with an access cover installed that does
not have a pressure relief hole.
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com
To Next Page
Loading...
