Documenting Process Calibrator
Operation Features
17
Table 4. Buttons (cont)
Item Button Description
, , ,
Push or to increase display intensity. Push or to decrease intensity (seven levels).
Make choices from lists on the display.
Increase or decrease the source level when using the step feature.
In calculator mode, provides arithmetic functions (+ - ÷ ×).
Clears a partial data entry, or prompts for output value when in the SOURCE mode. When
you use a pressure module, zeros the pressure module indication.
Completes a numeric entry when a source value is set, or confirms a choice in a list. In
calculator mode, acts as the equals arithmetic operator (=).
q
Toggles between resistance and continuity functions in MEASURE mode, or selects the
resistance function in SOURCE mode.
h
Toggles between ac voltage and frequency functions in MEASURE mode, or selects
frequency output in SOURCE mode.
Numeric
keypad
Used when a numeric entry is necessary.
Cycles the Product through MEASURE, SOURCE, and MEASURE/SOURCE modes.
1.800.868.7495info@Fluke-Direct.ca
Fluke-Direct.ca
To Next Page
Loading...
