76
Service
1-4
Generally, function switch positions to select, input terminals to use, and display
notation to be read are presented in this manual as they are seen on the multimeter.
Special terms (mnemonics) used in text descriptions of multimeter circuitry
correspond to terms used on the schematic diagrams in Section 5.
Specifications 1-4.
Specifications for Fluke Model 76 are presented in Table 1-1 on the following page.
Accuracy is specified for a period of one year after calibration, at 18°C to 28°C (64°F to
82°F) with relative humidity to 90%. AC conversions are ac-coupled and true rms
responding.
Accuracy Specifications are given as:
± ([% of reading] + number of least significant digits)
To Next Page
Loading...
