EasyManua.ls Logo

Fluke 76 - Page 15

Fluke 76
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction and Specifications
Specifications 1
1-5
Table 1-1. Specifications
Display: Digital: 4000 counts, updates 4/sec
Analog: 63 segments, updates 40/sec
Frequency: 9,999 counts
Capacitance: 9,999 counts
Response Time of
Digital Display:
Vac <1.5s (for upscale only)
Vdc <1s
Ω <1s to 40 kΩ, <2s to 4 MΩ, <10s to 40 MΩ
Operating Temperature: 0°C to 55°C
Storage temperature: -40°C to 60°C
Temperature Coefficient: 0.1 x (specified accuracy)/ °C (<18°C or> 28°C)
Relative Humidity: 90% (0°C to 30°C)
75% (30°C to 40°C)
45% (40°C to 50°C)
35% (50°C to 55°C)
Altitude: Operating: 2,000 meters
Storage: 12,000 meters
Battery type: 9v, NEDA 1604A or IEC 6LR61
Battery Life: 500 hrs typical with alkaline
Continuity Beeper: 4096 Hz
Vibration: Per MIL-T28800E, Class III
Sinusoidal, Non Operating
Drop: ANSI/ISA-S82.01-1994 and EN61010-1, 1993
1 meter drop to hardwood on concrete
Enclosure: Conforms to IP-40 Per IEC-529
Size (HxWxL): 2.8 cm x 7.5 cm x 16.6 cm
(1.12 in x 2.95 in x 6.55 in)
Weight: 12 oz (340g)
EMC: EN 50081-1, EN 50082-1
Surge Protection: 6 KV peak per IEC 1010-1, 1990-09 and ANSI/IEEE C62.41-1991
Safety: 600V AC, 600V DC maximum voltage between any terminal and earth ground.
Complies with IEC-1010-1, 1990-09 and ANSI/ISA-S82.01-94 for use in
overvoltage category III locations, 600V, UL3111, CSA/CAN C22.2 No.
1010.1-92 and EN61010 part 1-1993.
Certifications:
and CSA
UL and TUV pending

Table of Contents

Other manuals for Fluke 76

Related product manuals