Fluke 773 Specifications

2 Fluke Corporation 772 and 773 Milliamp Process Clamp Meters
Functions
mA measure
w/jaw
mA measure
In circuit mA source mA sim
Loop power
24 V
DCV source
0-10 V
DCV
measure
0-30 V
Scaled mA
output to mA
input mA in/out
771
•
772
• • • • •
773
• • • • • • • • •
Functional specifications
Function Resolution and range Accuracy Notes
771, 772, 773 mA measurement
0 to 20.99 mA 0.2 % + 2 counts
Measured by clamp
21.0 mA to 100.0 mA 1 % + 5 counts
772 and 773 mA measurement 0 to 24.00 mA 0.2 % + 2 counts
Measured in series with test
jacks
772 and 773 mA source 0 to 24.00 mA 0.2 % + 2 counts
Maximum mA drive: 24 mA into
1,000 ohms
772 and 773 mA simulate 0 to 24.00 mA 0.2 % + 2 counts Maximum voltage 50 V dc
773 Voltage source 0 to 10.00 V dc 0.2 % + 2 counts 2 mA maximum drive current
773 Voltage measure 0 to 30.00 V dc 0.2 % + 2 counts
General specifications 772 and 773
(see www.fluke.com/771 for more information on the Fluke 771 specifications)
Influence of earth’s field < 0.12 mA
Battery (4) 1.5 V, Alkaline, IEC LR6
Working hours 12 hours @ 12 mA source into 500 ohms
Size (HxWxL) 772, 773: 41.3 mm x 76 mm x 248 mm (1.625 in x 3 in x 9.75 in)
771: 59 mm x 38 mm x 212 mm, (2.32 in x 1.5 in x 8.35 in)
Weight 772, 773: 415 g (14 oz) 771: 260 g, (9.1 oz)
Operating temperature -10 °C to 50 ºC
Storage temperature -25 °C to 60 °C
Operating humidity < 90 % @ < 30 °C; < 75 % @ 30 ~55 °C
Operating altitude 0 ~ 2,000 m
Storage altitude None
IP rating IP 40
Vibration requirements Random 2 g, 5 Hz to 500 Hz
Drop test Passes 1 meter drop test (except the jaw)
EMI, RFI, EMC
Meets applicable requirements in EN61326-1 Note: For current
measurement w/jaw, add 1 mA to specification for EMC field strengths
of 1 V/m up to 3 V/m
Temperature coefficients 0.1(/°C x specified accuracy for temperature < 18 °C or > 28 °C)
Warranty Three-years, one-year on mA clamp assembly and cable
Ordering information
Fluke-772 Milliamp Process Clamp Meter
Fluke-773 Milliamp Process Clamp Meter
Included accessories
Soft carrying case, test leads, alligator clips, hanging
strap and user’s manual.
772 773
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa +31 (0) 40 2675 200 or
Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2009 Fluke Corporation. Specifications subject to
change without notice. Printed in U.S.A.
3/2009 3442293 D-EN-N Rev A
Modification of this document is not permitted
without written permission from Fluke Corporation.
Fluke. Keeping your world
up and running.
®

Fluke 773 Specifications

General

Operating altitude	0 - 2000 m
Storage temperature (T-T)	-25 - 60 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	0 - 90 %
Battery type	AA
Power source	Battery
Battery voltage	1.5 V
Battery technology	Alkaline
Number of batteries supported	4
Product type	Digital multimeter
Product color	Grey, Red, Yellow
DC current range	0 - 0.024 A
DC voltage range	0 - 30 V
Placement supported	Handheld multimeter
Basic accuracy (DC current)	0.2% + 2 counts

Weight and Dimensions

Depth	44 mm
Width	70 mm
Height	246 mm
Weight	410 g