Fluke 8270A - Connect to Mains Power; Mains Voltage

8270A/8370A
Operators Manual
6
Connect to Mains Power
XWWarning
To prevent shock hazard, connect the factory-supplied three-
conductor mains power cord to a properly-grounded power
outlet. Do not use a two-conductor adapter or extension cord,
as it will break the protective ground connection.
Mains Voltage
To power the Product, mains voltage ranging from 100 V ac to 240 V ac with
frequencies from 47 Hz to 63 Hz is required.
The Product comes with the appropriate line power plug for the country of
purchase. If a different type is necessary, refer to Table 3 for a list that shows the
mains line power plug types available from Fluke Calibration.
Table 3. Line Power Cord Types Available from Fluke Calibration
LC-1
LC-3
LC-4
LC-5
LC-6
LC-7 LC-42
hhp004.eps
Type Fluke Calibration Option Number
North America LC-1
Universal Euro LC-3
United Kingdom LC-4
Switzerland LC-5
Australia LC-6
South Africa LC-7
Brazil LC-42