867B/863
Users Manual
3-4
Table 3-1. General Features
Number Example Name Description
1 Combo
Meter
View
Trend
Display
Combo, Meter, View, and Trend are the standard measurement display modes
for most functions. Auto Diode Test, LOGIC Test, and COMPONENT Test use
unique display modes. Refer to Figure 3-3 for descriptions of display features.
2 Rel Softkey
Labels
Labels define present uses for associated softkeys. A highlighted label means
that item is presently selected. Labels change with rotary selector positions and
key presses. If a small
>
symbol appears with a softkey label, you can access
an additional set of softkey labels (a submenu) by pressing this softkey.
3
1
Softkeys
The five blue softkeys serve different functions, depending on the rotary
selector position and other keys in effect.
4
r
Range
Key
Press at any time to change the range of a meter reading or the amplitude of a
waveform. Select “Auto” (the standard selection) for an optimal display or
“Manual” for selection of a specific range. Present range information is shown in
the lower right corner of the display. Refer to Range Softkeys in Chapter 4.
5
M
Min Max
Key
Press once to enable a display showing minimum, average, and maximum
values. Refer to Min Max Softkeys in Chapter 4.
To Next Page
Loading...
