Fluke 863 - Testing Diodes and Measuring Capacitance

Making Measurements
Testing Diodes and Measuring Capacitance
2
2-11
ACOM
V
EXT TRIG
1
4
3
FREEZE
DISPLAY
MODE
SAVE
PRIN T
MIN
MAX
RANGE
WAKE UP
HZ
TOUCH
HOLD
12 5
34
Red
2
mA/
A
rita0590.eps
Figure 2-5. Diode Test and Capacitance Measurements
Testing Diodes and Measuring
Capacitance
6
Turn the Selector to Diode/Capacitance. The
GMM assumes Meter Mode.
7
Connect the test leads
as shown.
8
Use the Diode/Capacitance Softkeys as
discussed below. “Rel” and “
/
” (Continuity)
are not available in Auto Diode.
9
H
and
F
are not allowed in Diode Test.
Pressing
r
is not allowed in Diode Test; a long
beep sounds.
r
is allowed in Capacitance.