The
JOHN FLUKE MFC,
CO., INC.* warrants
each instrument
manufactured
by them to
be free from
defects in material
and workmanship.
Their
obligation under this
Warranty is
limited
to
servicing or
adjusting
an instrument
returned to
the factory for
that purpose, and to making
good at the factory
any part or parts
thereof; except
tubes, fuses,
choppers and batteries,
which shali, within
one year after
making delivery
to
the original
purchaser, be
returned
by
the original
purchaser with
transportation
charges
prepaid, and which
upon their examination
shall dis-
close To their
satisfaction to
have been thus defective,
(f the fault
has been caused
by misuse or abnormal
conditions of
operations, repairs
wiii
be
billed
at
a
nominal
cost, in this
case, an estimate will
be submitted before
work is started,
if requested.
If
any fault
develops,
the following
steps should
be taken;
1
.
Notify
the John Fluke
Mfg. Co.,
Inc.,* giving full
details of
the
difficulty,
and include
the Mode!
number, type number,
and
serial
number.
On
receipt of this information,
service data or
shipping instructions
wilt
be forwarded to
you.
2.
On
receipt of
the shipping
instructions, forward
the instrument
prepaid,
and repairs will
be made
at
the factory, if
requested,
an
estimate wiil
be
made before the work
begins,
provided the instrument
is not
covered by the Warranty.
“The foregoing
warranty
is in lieu of all other
warramies,
express or implied,
including
but not limited
to,
any implied
warranty of
merchantability,
fitness or
adequacy for
any particular
purpose or use.
Fluke shall
not
be liable for any special,
incident or
consequential
damages."
SHIPPING
Ail
shipments of John Fluke
Mfg. Co., Inc.*
instruments should
be made via United Parcel
Service or
"Best
Way"*
*
prepaid. The instrument
should be shipped in
the original packing carton;
or if it is not available,
use any suitable
container that is rigid. If
a substitute container is
used,
the instrument should
be wrapped in paper
and surrounded
with at least four
inches of excelsior or similar
shock-absorbing material.
CLAIM FOR
DAMAGE
IN SHIPMENT
The
instrument should
be thoroughly
inspected
immediately upon
receipt. All material
in the
container should
be checked against
the enclosed
packing
list. The
manufacturer will
not be
responsible for
shortages against
the
packing
sheet unless
notified
immediately, If the
instrument
fails
to operate properly,
or is
damaged in any
way. a claim
should be filed with the
carrier.
A
full
report of
the damage should
be obtained
by
the
claim agent,
and this report
should
be forwarded to John
Fluke Mfg. Co., Inc.*
Upon
receipt of this
report, you will
be
advised
of
the
di^osition of
the equipment for
repair or
repiecement. Include
the model
number, type
number, and serial
number
when
referring
to this
instrument
for any reason.
The John Fluke Mfg. Co..
Inc.* will
be happy to
answer all application
questions which
will
enhance your use
of this instrument.
Please ad-
dress
your requests to; JOHN
FLUKE MFG.
CO,,
INC.,
P. O. Sox
7428, SEATTLE,
WASHINGTON
98133*.
*
For European
customers: FLUKE
(Nederland)
B.V.
Ledeboerstraat
27
Tilburg,
Netherlands
**For European
customers. Air Freight prepaid,
FLUKE
TECHNICAL
SERVICE
CENTERS
Fluke
Western
Technical
Center
Mike
Nagy, Service
Manager
2020 North
Lincoln
St.
Burbank,
CA 91504
Tei.
213-849-4641
TWX: 910-497-2086
Fluke Western
Technical
Center
Tom
Marshall, Service
Manager
4805
Mercury
St.
San
Diego,
CA 92111
Tel. 714-565-4455
TWX: 910-337-1273
Fluke
Western
Technical
Center
Attn;
Tom Marshall
2359 De
La Cruz Blvd
Santa Clara,
CA
95050
Tei. 408-244-1505
TWX:
910-338-0121
Fluke S.W.
Technical
Center
Mel
Sueizie,
Service Manager
Unit
4
1980
South
Quebec Street
Denver, CO
80231
Tel. 303-700-1228
Fluke S.E.
Technical Center
Jesse Morse,
Service
Manager
P.O.
Box
6578
940
Nortfi Fern
Creek Avenue
Orlando,
FL 32803
Tel.
305-896-2296
TWX:
810-850-0185
Fluke
Midwestern
Tech Center
Bruce Hunt, Service
Manager
1287 North
Rand Road
Des Plaines,
i L 60016
Tel. 312-298-7470
TWX; 910-233-4978
Fluke
Mideastern
Tech
Center
John Hines,
Service
Manager
11501 Huff
Court
Kensington,
MD
20795
Tel. 301-881-5300
TWX;
710-825-9645
Fluke
N.E.
Technical Center
Dick Zemba,
Service
Manager
109
Massachussetts
Ave.
Lexington,
MA
02173
Tel. 617-861-8620
TWX; 710-826-17
15
Fluke
Midwestern Tech
Center
Robert Wayne,
Service Mgr.
10800 Lyndale Avenue
South
Minneapoiis,
MN 55420
Tei. 612-8844541
TWX: 910-576-3141
Fluke Eastern
Technical
Center
Bernard Ciongoii,
Service Mgr.
101 Berkshire
Ave.
Paterson, NJ
07502
Tei. 201-742-3215
TWX: 710-988-5945
Fluke
Eastern Technical
Center
Frank
Forte,
Service Manager
4515
Culver
Road
Rochester, NY
14622
Tel - 716-342-6940
TWX; 510-253-6145
Fluke
S.E. Technical
Center
Dwain
Cox, Sewice
Manager
P.O.Box
9619
1310 Beaman Place
Greensboro,
NC 27408
Tel. 919-273-1918
I WX: 5
10-925-1
173
John Fluke Mfg.
Co.,
Inc.
Bill
Fetrow, Tech, Services
Spvr.
7001
-
220th S.W.
Mountlake Terrace,
WA
98043
Tel.
206-774-2238
TWX; 910449-2850
Fluke
Canadian Techtiical Center
Tony
Unser, Service Manager
640
nth Ave. S.W.
Calgary,
Alberta
Tel. 403-261-0780
TWX: 610-821-2233
Fluke
Canadian Technical Center
Herb
Duval, Service Manager
6427
Northam Drive
Mississauga,
Ontario
Tel.
416-678-1500
TWX: 610492-2119
Rev.
5/75
To Next Page
Loading...
