A7R29 for a
meter indication of zero-center
±1/2
imjor divisions.
u. Apply a
calibrated 500 volt ac signal at 10 kHz be-
tween the HI and LO
INPUT terminals, observing
tliat
the
meter
indicates zero-center ±1/2
major divisions,
V.
Set the Readout
dials to
10
00.
00
and apply
a
1000 volt
ac
s^nal at 10 kHz, observing that the meter indi-
cates zero-center
±5 major divisions.
4-57.
When the results of these calibration adjustments
are obtained,
the
Model
893 is fully calibrated, and the
test
equipment can be
disconnected
from
the instrument.
4-18
893A
To Next Page
Loading...
