The
JOHN FLUKE MFG.
CO., INC.* warrants
each instrument
manufactured by them to
be free from
defects in
material and workmanship.
Their obligation
under this Warranty
is limited
to servicing or adjusting
an instrument
returned to
the
factory
for
that purpose,
and to making
good at the factory
any
part
or parts thereof;
except tubes, fuses,
choppers and batteries,
which shall, within
one
year after making
delivery to
the original
purchaser,
be
returned
by the original
purchaser with transportation
charges prepaid,
and which
upon their
examination shall
dis-
close
to their satisfaction
to have been thus
defective, if
the
fault
has been caused by misuse or
abnormal
conditions
of operations,
repairs wifi
be billed at
a
nominal cost. In
this case, an estimate
wit! be submitted
before work is started, if
requested.
If any fault
develops, the following
steps should
be
taken:
1. Notify
the John Fluke Mfg.
Co., Inc.,* giving
full details of
the
difficulty,
and include
the Model
number,
type
number,
and serial
number.
On receipt
of this information,
service data or
shipping instructions
will
be
forwarded
to you.
2. On receipt
of the shipping
instructions, forward
the instrument
prepaid,
and repairs will
be made
at the factory. If
requested, an
estimate will
be made before
the work begins,
provided the
instrument is not
covered
by
the Warranty.
"The foregoing warranty
is in lieu of all other
warranties,
express or implied,
including
but not limited
to,
any implied warranty of
merchantability,
fitness or
adequacy
for
any
particular
purpose or use.
Fluke shall
not be liable for any
special, incident
or consequential
damages."
SHIPPING
All
shipments of John Fluke Mfg. Co.,
Inc.* instruments should
be made via United Parcel Service
or
"Best Way"** prepaid. The
instrument
should be shipped in the original packing
carton; or if it is not
available, use any suitable
container that is rigid. If
a substitute
container is
used,
the instrument should be wrapped
in paper and surrounded
with at least four inches of
excelsior or similar
shock-absorbing
material.
CLAIM FOR
DAMAGE IN
SHIPMENT
The
instrument should be
thoroughly
inspected immediately
upon receipt. All material
in
the container should
be checked
against the enclosed
packing
list.
The manufacturer will
not be responsible for
shortages against
the packing sheet
unless notified
immediately.
If the
instrument
fails
to operate properly,
or is damaged
in any way.
a claim should ba filed
with the carrier.
A full report
of the damage
should
be obtained
by the claim agent,
and this report
should be forwarded
to John Fluke Mfg.
Co.,
Inc.'
Upon
receipt of
this report, you
will be advised
of the
disposition
of the equipment for repair or
replacement,
include the model
number,
type number, and serial
number
when referring
to this
instrument
for any reason.
The John Fluke Mfg. Co.,
Inc.* will
be happy to answer all
application
questions which will
enhance your
use of this
instrument.
Please ad-
dress
your requests to: JOHN
FLUKE MFG.
CO.. INC,, P,
O. Box
7428,
SEATTLE.
WASHINGTON 98133*.
*
For European customers:
FLUKE
(Nederland) B.V.
Ledeboerstraat
27
Tilburg,
Netherlands
**For European
customers, Air Freight
prepaid.
Fluke
Western Technical
Center
Mike Nagy.
Service
Manager
2020 North
Lincoln
St.
Burbank,
CA
91504
Tel. 213-849-464!
TWX:
910-497-2086
Fluke
Western
Technical
Center
Tom
Marshall,
Service
Manager
4805
Mercury
St.
San Diego,
CA 9211 1
Tel. 714-565-4455
TWX: 910-337-1273
Fluke
Western
Technical
Center
Attn;
Tom Marshall
2359 De
La
Cruz
Bivd
Santa Clara,
CA 95050
Tel. 408-244-1505
TWX; 910-338-0121
Fluke
S.W.
Technical Center
Mel
Suelzle, Service
Manager
Unit
4
1980 South
Quebec Street
Denver,
CO
80231
Tel-303-750-1228
Fluke
S.E. Technical Center
Jesse
Morse, Service Manager
P.O.Box
6578
940 North Fern
Creek
Avenue
Orlando,
FL 32803
Tel. 305-896-2296
TWX:
810-850-0185
Fluke
Midwestern
Tech Center
Bruce
Hunt, Service
Manager
1287 North
Rand Road
Des
Plaines,
!L 60016
Tel
-
312-298-7470
TWX:
9I0-233-497S
Fluke
Mideastern
Tech Center
John Hines,
Service Manager
1
1501 Huff Court
Kensington,
MD 20795
Tel.
301-881-5300
TWX:
710-825-9645
Fluke
N.E. Technical Center
Dick
Zemba, Service
Manager
109
Massachussetts
Ave.
Lexington, MA
02173
Tel. 617-861-8620
TWX: 710-826-1715
Fluke
Midwestern Tech
Center
Robert Wayne, Service
Mgr.
10800 Lyndale Avenue
South
Minneapolis, MN
55420
Tel.
612-884-4541
TWX: 910-576-3141
Fluke Eastern
Technical Center
Bernard Ciongoli,
Service Mgr.
101
Berkshire Ave.
Paterson,
NJ 07502
Tei. 201-742-3215
TWX; 710-988-5945
Fluke Eastern
Technical Center
Frank Forte,
Service Manager
4515 Culver
Road
Rochester,
NY 14622
Tei. 716-342-6940
TWX: 510-253-6145
Fluke
S.E. Technical Center
Dwain Cox,
Service Manager
P.O.Box
9619
1310 Beaman Place
Greensboro,
NC 27408
Tel.
919-273-1918
TWX:
510-925-1
173
John Fluke Mfg.
Co.. Inc.
Bill Fetrow,
Tech, Services Spvr.
7001
-
220th S.W.
Mountiake
Terrace, WA 98043
Tel.
206-774-2238
TWX; 910-449-2850
Fluke
Canadian Technical
Center
Tony Unser,
Service Manager
640
11th
Ave.
S.W.
Calgary, Alberta
Tel.
403-261-0780
TWX; 610-821-2233
Fluke Canadian
Technical Center
Herb
Duvat, Service
Manager
6427
Northam Drive
Mississauga,
Ontario
Tel. 416-678-1500
TWX:
610492-21
19
Rev. 5/75
To Next Page
Loading...
Need help?
General
