Fluke 9102S - Delta

DELTA6.12.3
This probe parameter characterizes the curvature of the resistance-temperature rela-
tionship of the sensor. The value of this parameter is set at the factory for best instru-
ment accuracy.
DeLta FlashesforonesecondandthentheDELTAsettingis
displayed
0.0000 CurrentDELTAsetting
To change the DELTA setting, press the up or down arrows.
0.1000 NewDELTAsetting
To accept the new setting, press “SET”. Press “EXIT” to continue without storing the
new value.
S
 AcceptthenewDELTAsetting