DSX CableAnalyzer
Users Manual
44
GPU104.EPS
Figure 20. Tabular Results Screen for a Frequency-Domain Test
The location where the tester made the measurements. To
switch between results for the main and remote, tap REMOTE
or MAIN (
).
The results are for the wire pair or pairs shown. To see the results
for a different pair or pairs, tap a tab on the right side of the
screen (
).
WORST MARGIN is the measurement that is nearest to the limit
line or exceeds the limit by the largest amount. WORST VALUE is
the worst measurement.
riešenia na presné meranie
To Next Page
Loading...
