Certifying Fiber Cabling
29
Figure 11. Equipment for Testing in Loopback Mode (1 Jumper Method)
amd49f.eps
A
Tester with fiber module and connector adapter installed
(match connector adapter to the connectors in the link)
B
Memory card (optional)
C
AC adapter with line cord (optional)
D
Test reference cord. Match the fiber to be tested. Long
end must have SC connector. For the other connectors,
match the connectors in the link.
E
Two singlemode adapters of the appropriate type
F
Mandrel. Recommended when testing multimode
fiber with a DTX-MFM2 module. See page 12.
G
Fiber cleaning supplies
H
A microscope for inspecting fiber connectors (the
FT500 FiberInspector Mini Video Microscope is shown)
To Next Page
Loading...
