ESA609
Users Manual
8
Product Handstrap
Use the handstrap to carry the Analyzer, see Figure 3.
hpf122.eps
Figure 3. Product Handstrap
Connect the Analyzer to Line Power
Warning
To prevent possible electrical shock, fire, or
personal injury, do not use an extension cord
or adapter plug.
Connect the Analyzer to a properly grounded three-prong
outlet. The Analyzer will not properly test a DUT when the
ground lead is open.
The Analyzer is intended for use with single-phase,
grounded power. It is not intended for dual, split-phase or
three-phase power configurations. But it can be used with
any power system that supplies the correct voltages for
single-phase and is grounded.
To Next Page
Loading...
