Need help?Do you have a question about the Fluke ESA615 and is the answer not in the manual?
General| Device Type | Electrical Safety Analyzer |
|---|---|
| Display | LCD |
| ECG Simulation | Yes |
| Respiration Simulation | Yes |
| Temperature Simulation | Yes |
| IBP Simulation | Yes |
| Defibrillator Synchronisation | Yes |
| Insulation Test Voltage | 500 V |
| Mains Voltage | 100 V to 240 V |
| Mains Frequency | 50 Hz to 60 Hz |
| Leakage Current Tests | Earth Leakage, Enclosure Leakage, Patient Leakage |
| ECG Amplitude | 0.5 mV to 5 mV |
| Voltage Range | Not Applicable |
| Current Range | 0.1 mA to 20 A |
| Resistance Range | Not Applicable |
| Frequency Range | Not Applicable |
| Leakage Current Ranges | 0.1 μA to 20 mA |
| Leakage Current Range | 0.1 μA to 20 mA |
Details warranty terms, product support, and return procedures.
Covers copyright, unpacking, technical support, and claims procedures.
Overview of the ESA615 analyzer, its purpose, and essential safety precautions.
Identification of front, side, and top-panel controls and connections.
Guidance on holding, connecting power, connecting DUT, and powering on.
Steps for configuring operator, date, time, standards, and other settings.
Selecting test standards and configuring test parameters like polarity and limits.
Performing Mains Voltage and Ground Resistance tests.
Procedures for measuring insulation resistance between various points.
Measuring equipment current and introducing various leakage current tests.
Detailed procedures for Earth, Chassis, Patient, and Lead leakage tests.
Performing alternative, direct, and differential leakage tests.
Instructions for using the 1210 adapter to increase applied parts connections.
Performing voltage, resistance, and current measurements using the PTP function.
Generating waveforms to test ECG monitors and printers.
Managing test data, creating/editing test sequences, and saving results.
Displaying and deleting recorded test results.
Guidelines for product care, fuse replacement, and cleaning procedures.
Lists of available replacement parts and accessories with part numbers.
Technical details including operating conditions, power, and safety standards.
In-depth specifications for voltage, resistance, current, and leakage measurements.
To Next Page
