Fluke ESA615 - Set Polarity Switching Delay

Electrical Safety Analyzer
How to Set Up the Product
17
Set Polarity Switching Delay
When the test receptacle of the Product is switched, a
delay can be set to control the actual switch time. To set
the polarity delay:
1. From the setup menu, push G or H until the
Polarity Delay variable is highlighted.
2. Push e.
3. Push G or H to highlight one of the preset delay
values.
4. Push e.
Set the Date Format
1. From the setup menu, push the Instrument Setup
softkey.
2. Push G or H until the Date Format variable is
highlighted.
3. Push e.
4. Push G or H to highlight DD/MM/YYYY,
MM/DD/YYYY, or YYYY/MM/DD.
5. Push e.
Set the Time Format
1. From the setup menu, push the Instrument Setup
softkey.
2. Push G or H until the Time Format variable is
highlighted.
3. Push e.
4. Push G or H to highlight 12 Hour or 24 Hour.
5. Push e.
Set the Language
The Product can display data in English, French,
German, Spanish, Italian, or Portuguese. To change the
language:
1. From the setup menu, push the Instrument Setup
softkey.
2. Push G or H until the Language variable is
highlighted.
3. Push e.
4. Push G or H to highlight one of the languages.
5. Push e.