Fluke ESA609 - Unpacking the Analyzer

ESA609
Users Manual
4
• Use only the mains power cord and
connector approved for the voltage and
plug configuration in your country and
rated for the Product.
• Make sure the ground conductor in the
mains power cord is connected to a
protective earth ground. Disruption of the
protective earth could put voltage on the
chassis that could cause death.
• Replace the mains power cord if the
insulation is damaged or if the insulation
shows signs of wear.
• Connect the common test lead before the
live test lead and remove the live test lead
before the common test lead.
• Keep fingers behind the finger guards on
the probes.
• Do not use test leads if they are damaged.
Examine the test leads for damaged
insulation and measure a known voltage.
• Do not use a current measurement as an
indication that a circuit is safe to touch. A
voltage measurement is necessary to know
if a circuit is hazardous.
Unpacking the Analyzer
Carefully unpack all items from the box and check that you
have the following items:
• ESA609
• Safety Sheet
• Users Manual CD
• Carrying case
• Power cord
• ESA USA Accessory Kit (USA, Australia, and Israel
only)
• ESA EUR Accessory Kit
• Null Post Adapter