Fluke MDA-550 - How to Contact Fluke; Safety Information

MDA-550/MDA-510
Users Manual
2
The accessory set that is included for the Motor Drive
Analyzer is different than the ScopeMeter
®
Test Tool 190
Series II. See In The Box in this manual.
For User Manual corrections, download the latest manual
supplement at http://us.fluke.com/usen/support/manuals
.
How to Contact Fluke
To contact Fluke, use one of these telephone numbers:
• USA: 1-800-760-4523
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31 402-675-200
• Japan: +81-3-6714-3114
• Singapore: +65-6799-5566
• China: +86-400-921-0835
• Brazil: +55-11-3530-8901
• Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com
.
To register your Product, visit http
://register.fluke.com.
To view, print, or download the latest manual supplement,
visit http://us.fluke.com/usen/support/manuals
.
Safety Information
A Warning identifies hazardous conditions and procedures
that are dangerous to the user. A Caution identifies
conditions and procedures that can cause damage to the
Product or the equipment under test.
XW Warning
To prevent possible electrical shock, fire, or
personal injury:
• Read all safety information before you use
the Product.
• Carefully read all instructions.
• Do not alter the Product and use only as
specified, or the protection supplied by the
Product can be compromised.
• Use only the Fluke power supply, model
BC190 (Power Adapter).
• Before use, check that the
selected/indicated range on the BC190
matches the local line power voltage and
frequency.
• For the BC190 Power Adapter only use line
cords that comply with the local safety
regulations.
• Use only insulated voltage probes, test
leads, and adapters supplied with the
product, or indicated by Fluke as suitable
for the MDA-550/MDA-510 Motor Drive
Analyzer or Fluke 190 II ScopeMeter series.