MicroScanner Pro™
MicroScanner Pro Tests
11
If the wire does not go to the far end, the numerical
indicator for the open will be left blank. The word
Open will be displayed. Shorted pairs are indicated
with a connecting bracket, and the word Short will be
displayed.
Open: Pair 4 – 5
aue09f.eps
Short: Pair 1 – 2
aue10f.eps
When the wiring fault includes shorted or swapped
non-pair pins (e.g. non-pair pins 1 - 3), the wiremap
will display dashes for those numerical wire indicators.
Note
Shielded cross-over cables cannot be read by
MicroScanner Pro. Wiremap will show as a
series of dashes.
To Next Page
Loading...
