Need help?Do you have a question about the Fluke MicroScanner MS-POE and is the answer not in the manual?
General| Power over Ethernet (PoE) Testing | Yes |
|---|---|
| Wiremap Test | Yes |
| Length Measurement | Yes |
| POE Detection | Yes |
| POE Voltage Measurement | Yes |
| POE Power Measurement | Yes |
| Display | Color LCD |
| Cable Types Supported | Ethernet |
| Connector Types | RJ45 |
| Fault Types Located | shorts, opens, miswires, split pairs |
| POE Standards | IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt |
| Battery Type | Rechargeable Lithium-ion |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20 °C to 60 °C |
Critical safety precautions and warnings for operating the tester to prevent injury or damage.
Procedures for connecting and testing telephone cables in star and bus network configurations.
Details on PoE modes, signature types, and power status indicators.
To Next Page
