Maintenance
53
Maintenance
WWarningX
To avoid possible fire, electric shock, personal
injury, or damage to the tester:
•
Do not open the case. No user-serviceable parts
are inside.
•
Replacing electrical parts yourself will void the
tester’s warranty and might compromise its
safety features.
•
Use only specified replacement parts for user-
replaceable items.
•
Use only Fluke Networks authorized service
centers.
Cleaning
Clean the display with glass cleaner and a soft, lint-free
cloth. Clean the case with a soft cloth dampened with
water or water and a mild soap.
WCaution
To avoid damaging the display or the case, do
not use solvents or abrasive cleansers.
Battery Life, Status, and Replacement
WWarningX
To avoid possible electric shock or personal
injury:
•
Turn off the tester and disconnect all test leads
before replacing the battery.
•
Use only the correct type of batteries, properly
installed in the case, to power the tester.
Typical battery life:
•
MicroScanner PoE: approximately 15 hours of typical
use.
•
MicroScanner
2
: approximately 20 hours of typical
use.
Replace the tester’s batteries when the low battery
indicator (
) appears. See Figure 37.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
