Fluke MicroScanner MS-POE - Viewing Details for a Wire Pair

MicroScanner Series Cable Verifiers
Users Manual
26
Viewing Details for a Wire Pair
To see details for each wire pair, use   or  to move
through the screens.
In this mode, the tester continuously tests only the wire pair
you are viewing.
Figures 17 and 18 show examples of these screens.
Figure 17. Details for a Short
(MicroScanner
2
screen shown)
EGK18.EPS
Notes
On the results details screens, shorts are shown
only when they are between wires in a pair.
When there is a short, the far-end adapter and
the mapping of the unshorted wires are not
shown.
Short on pair
1,2 at 29.8 m.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com