MicroScanner Series
Cable Verifiers
Users Manual
20
EGK10.EPS
Figure 12. Split Pair
Telephone Voltages Detected
Figure 13 shows that telephone voltage is detected on pair
4,5.
Length is not shown because the voltage interferes with
length measurements.
WWarningX
The tester is not intended to be connected to
active telephone inputs, systems, or equipment,
including ISDN devices. Prolonged exposure to
the voltages applied by these interfaces may
damage the tester. Disconnect the tester if it
detects high voltage.
Split pair
icon
The split
pair flashes
Split pair wiring
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
