Fluke MicroScanner MS-POE - Bridge Tap Detected

MicroScanner Series Cable Verifiers
Users Manual
22
Bridge Tap Detected
Figure 14 shows a bridge tap detected at about 53.2 m.
Only the first bridge tap detected is reported. The distance
to a bridge tap is approximate because multiple reflections
from the bridge tap interfere with length measurements.
Note
Bridge taps more than 328 ft (100 m) from the
tester or taps less than 16 ft (5 m) long may not be
detected.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com