MicroScanner Pro
Users Manual
16
MICROSCANNER PRO also Identifies workstations.
1. Connect the cable to be tested to the MAIN jack
(identified on the unit right above the modular 8
jack).
2. To display the length screen, press the MODE key
until the word LENGTH appears on the screen.
M
ICROSCANNER PRO displays the word PC followed
by the length to the PC.
aue17f.eps
3. When MICROSCANNER PRO displays PC and the cable
length, press the MODE key to activate the
blinking Hub light.
aue18f.eps
To Next Page
Loading...
