Pocket Thermal Imager
Memory Menu (Memory Gallery)
13
3. Repeat for each additional image.
4. Tap Add Note.
A keyboard opens on the display.
5. Use the keyboard to enter a message.
6. Tap Save.
Delete Images
To delete images, do the corresponding procedure below for the desired action.
Delete an Image
To delete only one image:
1. Open an image in fullscreen mode.
2. Tap
. If needed, tap first.
3. Tap Delete.
Delete Multiple Images
To delete multiple images at the same time:
1. Select
> > Delete Multiple Images.
The display returns to the memory gallery.
2. Tap an image to select it. Tap an image again to clear the selection.
The border and filename text color change to yellow.
3. Repeat for each additional image.
4. Tap Delete Images.
5. Tap Delete.
Delete All Images
To delete all of the images at the same time:
1. Select
> > Delete All Images.
2. Tap Delete.
Asset ID
Use the memory gallery toolbar to add or remove an asset ID from an image that is saved in memory. See Asset
Identification (Asset ID).
To add an asset ID to an image:
1. Open an image in fullscreen mode.
2. Tap
.
3. Assign an asset ID. See Asset Identification (Asset ID).
To Next Page
Loading...
