Fluke ScopeMeter 123B - Fieldbus Test Limits

123B/124B/125B
Users Manual
Test Limits
The test limits apply to the selected bus type. To change
the test limits:
1. Push  to open the MENU.
2. Use
YZ to highlight BUSHEALTH.
3. Push  to open the BUS HEALTH menu.
4. Use
YZ to highlight the bus type.
Select User1 or User2 to create a customized set of
limits to test nonstandard bus systems.
Default settings are RS232 for User1 and Foundation
Fieldbus H1 for User2.
5. Push  to make the change.
6. From the BUSHEALTH main screen, push 1 to
open the SETUP LIMITS menu. The header shows
the bus type.
7. Use
YZWX to highlight the property for the limit.
Note
Use 2 to set all limits to the default setting.
hxv36.eps
48