Fluke Ti10 User Manual

PN 2803044
August 2007
© 2007 Fluke Corporation, All rights reserved. Printed in USA
All product names are trademarks of their respective companies.
Ti10, Ti25, TiR and TiR1
Thermal Imagers
Users Manual

Fluke Ti10 Specifications

General

Temperature Range	-20 °C to +250 °C (-4 °F to +482 °F)
Field of View	23° x 17°
Image Capture	Yes
Focus	Fixed
Data Storage	SD Memory Card
Battery Type	Internal rechargeable battery pack
Accuracy	±2°C or ±2% (whichever is greater)
IR Resolution	160 x 120 pixels

Summary

Limited Warranty and Limitation of Liability

Safety Information

Charging the Battery

Using the Menu

Focusing and Capturing an Image

Saving Imager Data

Adjusting the Thermal Image

Advanced Display Modes

Switching Between PIP and Full IR (Ti10 and TiR Only)

Describes how to switch between full infrared and picture-in-picture display modes for specific models.

Reviewing and Deleting Stored Images

Achieving Accurate Measurements

Making Accurate Temperature Measurements

Discusses factors affecting temperature measurement accuracy, including surface properties.

Setting Emissivity (Ti25 and TiR1 only)

Explains how to set emissivity values for accurate temperature readings on specific models.

Hardware and Specifications

Changing the SD Card

Provides instructions for inserting and ejecting the SD memory card.