Need help?Do you have a question about the Fluke Ti25 and is the answer not in the manual?
General| Temperature Range | -20 °C to +350 °C (-4 °F to +662 °F) |
|---|---|
| Field of View | 23° x 17° |
| Focus | Manual |
| Image Frequency | 9 Hz |
| Emissivity Correction | 0.1 to 1.0 adjustable |
| Operating Temperature | -10 °C to +50 °C (14 °F to 122 °F) |
| Detector Type | Focal Plane Array, uncooled microbolometer |
| IR Resolution | 160 x 120 pixels |
| Thermal Sensitivity | ≤0.1°C at 30°C (100 mK) |
| Display | color LCD |
| Image Capture | Yes |
| File Format | JPEG |
| Battery Type | Rechargeable |
| Battery Life | 4 hours |
| Accuracy | ± 2 °C or 2% (whichever is greater) |
| Spectral Range | 7.5 µm to 14 µm |
General overview of the Fluke thermal imagers for predictive maintenance and troubleshooting.
Provides phone numbers and website for contacting Fluke for support and product registration.
Essential safety guidelines, warnings, and cautions for using the imager to prevent harm or damage.
Lists the items included in the imager package for initial setup.
Instructions for charging the imager's rechargeable battery before first use.
Procedure for powering the thermal imager on and off using the softkey.
Identifies and describes the physical components and controls of the thermal imager.
Explains how to navigate the imager's menus using softkeys to access various settings.
Steps to change the language displayed on the imager's screen.
Procedure for setting the internal real-time clock of the imager.
Guide to setting the date on the imager, including format options.
Instructions for setting the time on the imager, supporting 12/24 hour formats.
How to focus the imager and capture thermal images, including initial storage options.
Process for saving captured images and radiometric data to an SD card.
Modifying thermal image display using colors/shades of gray via Palette and Range.
How to choose different thermal viewing patterns like Grayscale or Ironbow.
Method for setting temperature viewing range, either automatically or manually.
Adjusting the thermal span's central temperature value in manual ranging mode.
Adjusting the temperature difference for the palette in manual ranging mode.
Toggling between Picture-In-Picture and full infrared display modes.
Blending visual and thermal images with adjustable levels and PIP display.
How to view, select, and delete images stored on the SD card.
Recording up to 60 seconds of audio annotation for images before saving.
Playing back recorded voice annotations associated with stored images.
Switching temperature display between Celsius and Fahrenheit.
Toggling the display of hot and cold spot indicators on the thermal image.
Factors influencing accurate temperature measurements, including surface temperature and emissivity.
Adjusting the emissivity value for accurate temperature readings, using direct input or material tables.
Choosing between bitmap (.bmp) and proprietary radiometric (.is2) file formats for image storage.
Overview of the SmartView software for image analysis, reporting, and data management.
Instructions for inserting and ejecting the SD memory card from the imager.
Adjusting the LCD backlight to Auto-sensing or Full-Bright modes.
Summary of key technical specifications including operating temperature, display, and humidity.
Details about the included SmartView™™ software for analysis and reporting.
Information regarding the rechargeable battery, battery life, and charging.
Compliance with CE Directive, EMC Directive, and other safety standards.
EMC and C Tick compliance details for the device.
Information on the product warranty period and calibration cycle.
List of all languages supported by the imager's interface.
Comprehensive technical data including temperature range, accuracy, and measurement modes.
Specifications related to the imager's optical and sensor performance, like FOV and resolution.
Details on available color palettes and display settings for thermal images.
Technical parameters for manual level and span adjustments affecting temperature display.
Technical details on IR-Fusion blending levels and Picture-In-Picture display capabilities.
Technical specification for voice annotation recording time and usage.
Information on the SD card storage medium and its capacity for images and data.
Technical description of supported file formats for saving images (.bmp, .is2).
List of image file formats that can be exported using the SmartView software.
To Next Page
