Fluke TiR2 - Charge and Insert Battery

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55
Users Manual
1-6
Table 1-1. Standard Accessories
Number Description
A Portable Infrared Camera with Lens Cap
B Camera Carrying Case
C LCD Cleaning Cloth
D AC adapters (2)
E Auxiliary AC Power Supply (TiR2, TiR4, Ti45 and Ti55 only)
F AC Patch Cord
G Neck Strap
H Video Cable
I AC Power Supply
J Battery Charger
K Compact Flash Memory Card with PCMCIA Adapter
L Two Rechargeable Batteries
M Compact Flash Memory Card Reader with USB Adapter
N Getting Started Guide
O SmartView™ Software CD (includes SmartView Users Manual)
P Compact Flash Software CD
Q FlexCam Documentation CD (Users Manuals)
Charge and Insert Battery
Charge the batteries for 3 hours before use. Use only the rechargeable batteries
supplied. A battery is fully charged when the green LED light on the charger
remains solid.
Insert the charged battery into the slot on the bottom of the camera as shown in
Figure 1-2.