Fluke TiR2 - View Saved Image; Delete Saved Image

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55
Users Manual
3-2
The image name is displayed in the upper left corner of the display screen.
Tap
to return to scan target mode.
View Saved Image
To view images saved on the memory card:
1. Make sure memory card is inserted (see Chapter 2), then tap F.
2. Use the mouse controller to position the pointer over Browse Images on
the popup menu and tap E.
3. Position the pointer over the thumbnail view of the image you want to
open, and double-click E to open.
If the image you want is not on the first page, position the pointer over the
right/left arrows at the bottom of the display screen and tap E as many
times as needed to scroll to the page you want, then follow Steps 3-4.
4. Tap
to close the open image and return to scan target mode.
5. Tap
to accept setting change and return to scan target mode.
Delete Saved Image
To delete images saved on the memory card one at a time:
1. Make sure memory card is inserted (see Chapter 2), then tap F.
2. Use the mouse controller to position the pointer over Browse Images on
the popup menu and tap E.
3. Position the pointer over the thumbnail view of the image you want to
delete; the image is highlighted. Tap E.
4. Position the pointer over the Delete button at the bottom of the display
screen, tap E. A new dialog box appears; select Yes to delete the image,
No to keep the image, or Cancel to cancel the operation and return to the
thumbnail screen.
If the image you want to delete is not on the first page, position the pointer
over the right/left arrows at the bottom of the display screen and tap E
as many times as needed to scroll to the page you want, then follow
Steps 3-5.
5. Tap
to close the thumbnail screen and return to scan target mode.