Visual IR Thermometer
Fluke VT Report Desktop Software
15
To re s e t :
1. In the Reset submenu, push W or
X
to highlight √.
2. Push O to reset, then go to the Language submenu.
3. Set the language.
PIPTransparent (VT08 Only)
Use these steps to set the transparency of an infrared picture in PIP mode. The 0, 30 %, 60 %, and
90 % levels are available. As the level increases, the transparency becomes greater. The images in
Figure 3 show the transparency levels.
Figure 3. Transparency Levels
Fluke VT Report Desktop Software
Fluke VT Report desktop software for a PC is available to use with the Product and contains
features to analyze images, organize data and information, and make professional reports.
You can download the Fluke VT Report software and use it to edit image files.
To download the Fluke VT Report desktop software:
1. Go to https://www.fluke.com/en-us/support/software-downloads/software-for-fluke-infrared-
cameras.
2. On the website, follow the instructions to download the software to the PC.
Alarm Off
RelfMeasure 23 °C (73 °F)
AutoShut Disable
ScreenBright Medium
Laser Off
DateTime 24H
Menu Default
To Next Page
Loading...
Need help?
General
