HYDRO TECH PERFORMANCE MONITOR
ADVANCED FILTRATION SYSTEM
www.fluval-g.com
EN.15
CONDUCTIVITY POINTS
The following options are available:
Conduct: Displays the water conductivity value.
Find more information on conductivity on
www fluval-g.com.
Salinity: Displays water salinity in PSU. Salinity only
appears if water is marine
Alert: Turns “ON / OFF “Alert Conductivity, out of
range” message. When conductivity goes out of
rangetheEClineonthemainscreenwillash.
Min/Max: Sets the min/max values for the water
conductivity range. The minimum conductivity can’t
be higher than the maximum and vice versa.
MECHANICAL SCHEDULE
The following options are available:
Elapsed Days: Counts the days elapsed since the
last recorded maintenance. This information is
displayed on the “MECH” line on the main menu. To
reset to zero use the scroll keys to select the value,
press enter to choose the option, use the scroll key
to choose “YES” and press “Enter”.
Alert: Turns the warning message for “Mech”
maintenance alert “ON or OFF”.
Days to alert: Use the scroll keys to choose the
days between the previous and next maintenance.
The highest number available is 99.
CHEMICAL SCHEDULE
The following options are available:
Elapsed Days: Counts the days elapsed since the
last recorded chemical maintenance. This
information is displayed on the “CHEM” line on the
main menu. To reset to zero use scroll keys to select
the value, press enter to choose the option, use the
scroll key to choose “YES” and press “Enter”.
Alert: Turns the warning message for “Chem”
maintenance alert “ON or OFF”.
Days to alert: Use the scroll keys to choose the
days between the previous and next maintenance.
The highest number is 99.
BIOLOGICAL SCHEDULE
The following options are available:
Elapsed Weeks: Counts the weeks elapsed since
the last recorded biological maintenance. This
information is displayed on the “Biol” line on the
main menu. To reset to zero use scroll keys to
select the value, press “Enter” to choose “YES” and
press “Enter”.
Alert: Turns the warning message for “Bio”
maintenance alert “ON or OFF”
Weeks to alert: Use the scroll keys to choose the
weeks between the previous and next maintenance.
The highest number is 99.
To Next Page
Loading...
Need help?
General
