34
21.23.Display servos
(Pic 21.33)
This function displays in real time the position of the 10 servos.
The test button lets the 4 servos move slowly between their respective end points.
This allows testing of the consistency of the mechanics of the model.
(Pic 21.35) (Pic 21.36)
Name:
Modifies the name of the
current model.
Select model:
Select the model configuration
to load and use. In this example,
the first model is selected. Simply
touch another model menu item
to load and use it.
21.24.Models
(Pic 21.34)
Function Details:
This function is used to set the model type, airplane/glider/helicopter. It an save twenty different model
type parameters. It is changeable, copiable and renameable. You can move model parameters so a
SD card and delete them from the SD card.
Only compatible with the SD card 2.0, whose capacity is over 1GB
Function Details:
This function is to display model channel output and automatically test all output channels.
http://www.flysky-cn.com
38
To Next Page
Loading...
