23.07. Swashplate ring
(Pic 23.7)
This function is to set limitation for the swash plate travel to achieve the best flight effect.
Move the wheel to modify the corresponding value.
23.09. Gyroscope
23.08. Governor
(Pic 23.8)
(Pic 23.9)
This new function is mainly used for maintaining the propeller speed. The default channel is CH7.
It can be set in 5 conditions respectively
Move the wheel to modify the corresponding value.
This function is used for adjusting the gyro sensitivity in current conditions. The higher the sensitivity is, the more correction
the gyro provides and the “softer” or less responsive the helicopter feels. The default channel is CH5 and this function can be set
in 5 conditions respectively, to maintain a hover, assign a knob for adjusting the pitch in helicopter mode.
Move the wheel to modify the corresponding value.
http://www.flysky-cn.com
54
To Next Page
Loading...
