Digitalproportionalradiocontrolsystem
误码率说明：
表示实时数据无线传输丢包率，比率越大信号越差。当遥控使模型远离遥控器时，遥控器LCD显示误码率会
逐步增大，当此数据持续较大时，有发生失控的可能，请适当减少遥控的距离避免失控。
Error rate description:
It shows real-time packet loss rate. The higher the error rate is, the worse the signal becomes. Error rate
will increase gradually when the transmitter is moving away from model. It would cause loss of control if
error rate keeps in a higher level constantly. Please shorten control distance when it happens.
To Next Page
Loading...
