Web Configuration FIP11/FIP11W/FIP11WP User Manual
Delay" time, ATA will retry the resynchronization, defaulting to 3600
seconds
If the time to re-sync, but ATA is busy, in this case, ATA will wait for
some time, the longest is the "forced resynchronization delay", the
default is 14400s, after time, ATA will be forced to re-sync
After re-synchronization, whether to enable the firmware update
function, the default is enable
Whether to enable resynchronization from SIP
It is only used in the company within the provisions of the model.
When using TFTP with option 66 to implement the configuration, the
user must enter the correct profile name on the ATA web page. When
option 66 is disabled, this parameter does not work
Whether to enable Option 67
The URL of the configuration file
Note that the specified file path is relative to the root directory of the
TFTP server
Upgrade Error Retry Delay(sec)
Set the upgrade error retry delay interval, the default 3600 seconds