6. Use instructions of the device
Please read these instructions carefully before operating the device.
6.1 General advices
For the ST-F41/42 models, the cooking mode to be used must be taken into account when arranging the trays
inside the cooking chamber. In the case of a cooking cycle in which only the heating elements are used, it is
possible to place three trays on the rack guides provided for this purpose. If, on the other hand, it is decided to
carry out a combined cooking cycle (heating elements + microwave), only one tray will be used, so that the
microwaves have a direct impact on the product placed on it. For this purpose, the rack also has a guide to
facilitate the insertion of this tray, the position of which inside the chamber allows perfect cooking of the product
placed on it
Arrangement on trays in ST-F41/42 for the execution of a cooking cycle USING RESISTANCE ONLY:
Arrangement on trays in ST-F41/42 for the execution of a cooking cycle in COMBINED MODE
(RESISTANCE+MICROWAVE)
In the COMBINED COOKING MODE (RESISTANCES + MICROWAVE) NEVER use more than one tray.
For ST-F21/22 models, only one tray is available for food placement, so it is not necessary to take into account the
cooking mode to be carried out.